Remove the Fitting.
Save the Pipe.
The Pinell Tools “Contractor” Set is the heavy‑duty PVC hub remover kit built for contractors and plumbers who live on 1‑1/2", 2", 3", and 4" lines. This set puts four large‑diameter, drill‑powered Hub Removers in a dedicated waterproof, shock‑proof case, so you can remove glued PVC fittings while saving the original pipe on the biggest, most expensive runs you install and repair.
Instead of cutting out long sections of pipe, trenching, or jackhammering slab, each Hub Remover in the Contractor Set shaves the fitting out from the inside, leaving a clean hub on the existing pipe, ready for a fresh solvent weld. That means you can repair 3" and 4" drains, stacks, and mains in place—without tearing out finished concrete, walls, or ceilings just to get enough pipe to couple onto.
The set includes:
-
1‑1/2 inch PVC Hub Remover
-
2 inch PVC Hub Remover
-
3 inch PVC Hub Remover
-
4 inch PVC Hub Remover
All four tools drop into a rugged Contractor case designed specifically for Pinell Hub Removers, so your pipe‑saving kit is always organized, protected, and ready for the next jobsite.
-
Contractor‑focused set: 1‑1/2", 2", 3", and 4" Hub Removers for big‑line PVC work
-
Removes the fitting itself and saves the pipe, even in slabs and tight penetrations
-
Drill‑powered design for fast, controlled hub removal on large‑diameter lines
-
Ideal for slab penetrations, risers, stacks, mains, and commercial DWV and sewer systems
-
Comes in a waterproof, shock‑proof case built for jobsite abuse
-
Reduces demolition, excavation, patching, and material waste on every large PVC repair
For contractors bidding on commercial, multi‑family, and heavy residential work, The “Contractor” Set turns what used to be full‑day demo and re‑pipe jobs into targeted hub removals that protect the pipe, protect the structure, and protect your margins.
-
Size-Specific PrecisionEngineered specifically for this PVC hub size — not a one-size-fits-all tool.
-
Removes the Fitting, Saves the PipeShaves the glued fitting out from the inside, leaving a clean hub ready for a new solvent weld.
-
Drill-PoweredMounts in any standard power drill — corded or cordless. No special equipment needed.
-
Works in Tight SpacesReaches fittings flush to walls, ceilings, cabinets, and slabs where saws and multi-tools can't safely operate.
-
Reduces Demo & Material WasteNo extra couplings, no patching, no unnecessary demolition — just a targeted repair that protects your time and margin.
-
Anodized Aluminum ConstructionBuilt for the trade — corrosion-resistant, lightweight, and tough enough for daily use on job sites.
| Pipe Size | 1″, 1¼″, 1½″, 2″, 3″, 4″ PVC |
| Drive / Shank | 7/16″ Hex |
| Compatible Pipe | Schedule 40 PVC & ABS |
| Not Compatible With | Schedule 80 PVC |
| Drive Type | Standard power drill (corded or cordless) |
| Material | Anodized Aluminum |
| Origin | Made in USA |
| Warranty | Lifetime |
Watch How It Works
See exactly how the Hub Remover cuts out a glued PVC fitting from the inside — leaving the pipe intact and ready for a new solvent weld. No cutting, no grinding, no wasted pipe.
Shop All Sizes →The "Contractor" Set - 1-1/2", 2", 3" & 4" Hub Removers — FAQ
Everything you need to know about removing PVC hub fittings without cutting the pipe.
What sizes are included in The Contractor Set? +
The Contractor Set includes the 1″, 1¼″, 1½″, 2″, 3″, and 4″ Hub Removers — six sizes that cover everything from supply lines and branch drains all the way up to 4″ sewer mains. It's designed for contractors who need to handle any hub removal job on a commercial or residential site without going back to the truck for a different tool.
Who is The Contractor Set built for? +
It's built for plumbing contractors and service companies doing a wide variety of work — residential service calls, commercial maintenance, new construction repair, and everything in between. The six-size range means you're covered on virtually any PVC hub fitting you'll encounter.
Can I use these tools on any standard drill? +
Yes — all six Hub Removers in this set mount in any standard power drill, corded or cordless. No special equipment, adapters, or drivers needed.
Is this set a better value than buying individually? +
Yes. The Contractor Set is priced below the combined individual cost of the six tools. For contractors who work across multiple pipe sizes regularly, it's the most cost-effective way to build out the full working range.
Do the tools in this set come with a warranty? +
Every tool in The Contractor Set carries Pinell Tools' lifetime warranty. Made in the USA from anodized aluminum and built for the trade — if anything ever goes wrong, we stand behind every tool in the set.
Still have questions? Our team is based in Houma, Louisiana and knows these tools inside and out.
Contact Us →Three Steps. No Torch. No Damage.
Attach to your drill and done in minutes.
Insert the Hub Remover into any standard power drill — no special equipment needed.
Place the tool inside the hub fitting and engage your drill. The patented blade geometry does the work.
The fitting separates cleanly — the pipe stays undamaged and ready to accept a new fitting.
Save More with a Set
Bundle the sizes you need most and save on every job.
Includes: 1½″, 2″ & 3″ Hub Removers
Includes: 1½″, 2″, 3″ & 4″ Hub Removers + waterproof/shockproof case
Includes: All 8 sizes (½″–4″) + waterproof/shockproof case
Need a Different Size?
All 8 sizes available — pick yours.
