Remove the Fitting.
Save the Pipe.
The Pinell Tools “Complete” Set is the full PVC Hub Remover system for pros who never want to say, “We don’t have the right size on the truck.” This flagship kit includes every Pinell Hub Remover from 1/2 inch through 4 inches in a single waterproof, shock‑proof case, giving you a drill‑powered, pipe‑saving solution for almost any Schedule 40 PVC repair you’ll ever see.
Each Hub Remover is engineered to remove glued PVC fittings while saving the original pipe. Instead of cutting out pipe, trenching, or opening walls and slabs, the tool shaves the fitting out from the inside, leaving a clean hub on the existing pipe, ready for a fresh solvent weld. On real‑world service calls and projects, that means less demolition, fewer fittings, and faster in‑line repairs—from small branch lines to big 4 inch mains.
The “Complete” Set includes:
-
1/2 inch PVC Hub Remover
-
3/4 inch PVC Hub Remover
-
1 inch PVC Hub Remover
-
1‑1/4 inch PVC Hub Remover
-
1‑1/2 inch PVC Hub Remover
-
2 inch PVC Hub Remover
-
3 inch PVC Hub Remover
-
4 inch PVC Hub Remover
All eight tools are stored in a rugged case designed specifically for Pinell Hub Removers, keeping each size organized, protected, and ready to go—from service trucks and mechanical rooms to jobsite trailers.
Key features and benefits:
-
Complete size range: 1/2", 3/4", 1", 1‑1/4", 1‑1/2", 2", 3", and 4" PVC Hub Removers
-
Removes the fitting itself and saves the pipe on everything from small branches to large mains
-
Drill‑powered design for fast, controlled hub removal in walls, slabs, ceilings, and tight spaces
-
Replaces risky saws and limited socket savers with a precise, pipe‑saving solution
-
Ideal for service trucks, contractors, facility maintenance, municipalities, and MRO teams
-
Packaged in a waterproof, shock‑proof case built for jobsite conditions
For companies that want one system to handle virtually any PVC repair—slab penetrations, wall penetrations, stacks, mains, pools, and mechanical rooms—the “Complete” Set is the top‑shelf, all‑sizes‑covered answer. It turns nightmare PVC repairs into consistent, repeatable hub removals that protect the pipe, the structure, and your bottom line.
-
Size-Specific PrecisionEngineered specifically for this PVC hub size — not a one-size-fits-all tool.
-
Removes the Fitting, Saves the PipeShaves the glued fitting out from the inside, leaving a clean hub ready for a new solvent weld.
-
Drill-PoweredMounts in any standard power drill — corded or cordless. No special equipment needed.
-
Works in Tight SpacesReaches fittings flush to walls, ceilings, cabinets, and slabs where saws and multi-tools can't safely operate.
-
Reduces Demo & Material WasteNo extra couplings, no patching, no unnecessary demolition — just a targeted repair that protects your time and margin.
-
Anodized Aluminum ConstructionBuilt for the trade — corrosion-resistant, lightweight, and tough enough for daily use on job sites.
| Pipe Size | ½″, ¾″, 1″, 1¼″, 1½″, 2″, 3″, 4″ PVC |
| Drive / Shank | 7/16″ Hex |
| Compatible Pipe | Schedule 40 PVC & ABS |
| Not Compatible With | Schedule 80 PVC |
| Drive Type | Standard power drill (corded or cordless) |
| Material | Anodized Aluminum |
| Origin | Made in USA |
| Warranty | Lifetime |
Watch How It Works
See exactly how the Hub Remover cuts out a glued PVC fitting from the inside — leaving the pipe intact and ready for a new solvent weld. No cutting, no grinding, no wasted pipe.
Shop All Sizes →The "Complete" Set - 1/2", 3/4", 1", 1-1/2", 1-1/2", 2", 3" & 4" Hub Removers — FAQ
Everything you need to know about removing PVC hub fittings without cutting the pipe.
What sizes are included in The Complete Set? +
The Complete Set includes all eight Hub Removers: ½″, ¾″, 1″, 1¼″, 1½″, 2″, 3″, and 4″. It's the full Pinell Tools Hub Remover lineup in one package — every size from small supply lines all the way up to 4″ sewer mains.
Who is The Complete Set designed for? +
It's for plumbing contractors, service companies, and supply houses that want to be ready for any hub removal job regardless of pipe size. With all eight sizes on hand, there's no job you'll have to turn down or delay because you don't have the right tool.
Can I use these tools on any standard drill? +
Yes — all eight Hub Removers mount in any standard power drill, corded or cordless. No special equipment, adapters, or drivers needed. Every tool in the set works the same way — chuck it in and go.
Is The Complete Set a better value than buying individually? +
Yes. The Complete Set is priced significantly below the combined individual cost of all eight tools. It's the best per-tool value in the lineup and the right choice if you want the full range available at all times.
Do the tools in this set come with a warranty? +
Every tool in The Complete Set carries Pinell Tools' lifetime warranty. All eight Hub Removers are made in the USA from anodized aluminum and built for daily use on the job site — we stand behind every one of them.
Still have questions? Our team is based in Houma, Louisiana and knows these tools inside and out.
Contact Us →Three Steps. No Torch. No Damage.
Attach to your drill and done in minutes.
Insert the Hub Remover into any standard power drill — no special equipment needed.
Place the tool inside the hub fitting and engage your drill. The patented blade geometry does the work.
The fitting separates cleanly — the pipe stays undamaged and ready to accept a new fitting.
Save More with a Set
Bundle the sizes you need most and save on every job.
Includes: 1½″, 2″ & 3″ Hub Removers
Includes: 1½″, 2″, 3″ & 4″ Hub Removers + waterproof/shockproof case
Includes: All 8 sizes (½″–4″) + waterproof/shockproof case
Need a Different Size?
All 8 sizes available — pick yours.
