- Toilet Bowl Flange Remover Set - 3" & 4"
- Carrying Case
Remove the Flange.
Save the Pipe.
The Pinell Tools Toilet Bowl Flange Remover Set gives you both the 3 inch and 4 inch Toilet Bowl Flange Removers in one kit, so you can remove glued toilet flanges and save the pipe on almost any bathroom you walk into. Instead of chiseling, sawing, and hoping you don’t crack the drain, this set delivers two solid‑aluminum, mini‑lathe style cutters that shave the flange out from the inside—leaving the original Schedule 40 PVC or ABS pipe intact and ready for a new flange.
Each tool is machined from a single piece of aluminum and equipped with five offset carbide cutters engineered to cut faster and more accurately than traditional flange reamers and DIY methods. The offset cutter design turns your drill into a precision mini lathe, evenly removing the old flange instead of grabbing, chattering, or gouging the pipe. The result is a clean, round hub on the existing 3" or 4" pipe with no damage to the pipe wall and a solid, reliable seat for the new toilet flange.
Designed specifically for 3 inch and 4 inch Schedule 40 PVC and ABS toilet flanges, this set is ideal for plumbers, maintenance teams, property managers, and serious DIYers who need a pipe‑saving solution for both common closet bend sizes. From slab homes and apartments to hotels and commercial bathrooms, you get a predictable, repeatable way to replace flanges without tearing into floors, ceilings, or walls.
Key features and benefits:
-
Two‑tool set: includes both the 3 inch and 4 inch Toilet Bowl Flange Removers
-
Each tool is designed for Schedule 40 PVC and ABS (3" tool for 3" pipe, 4" tool for 4" pipe)
-
Removes the flange itself and saves the pipe, avoiding full drain line replacement
-
Solid aluminum bodies for strength, stability, and long‑term durability
-
Five offset carbide cutters on each tool for faster, smoother, more accurate cutting
-
Mini‑lathe style cutting action that shaves the flange without damaging the existing pipe
-
Ideal for slab houses, upstairs baths, multifamily, hotels, commercial restrooms, and maintenance fleets
-
Each size ships in its own protective case, keeping the set truck‑ and cart‑ready
If you’re done gambling with chisels and saws on glued toilet flanges, the Pinell Tools Toilet Bowl Flange Remover Set gives you both 3" and 4" coverage so you can remove the old flange in seconds, protect the drain, and install a new flange the right way—no extra demo, no broken pipe, and no guesswork.
-
Removes Glued-In Flanges CleanCuts the flange out from inside the pipe without chiseling, cracking, or damaging the surrounding Schedule 40 or ABS pipe.
-
Drill-Powered — Any Standard DrillThe 7/16″ hex shank fits any standard drill chuck — corded or cordless. No special equipment needed.
-
Job Done in Minutes, Not HoursEliminates chiseling, grinding, and the risk of cracking the drain pipe. One tool, one step, move on to the next job.
-
Works in Tight SpacesDesigned for real-world job site conditions — fits in confined bathroom floors and tight rough-in areas where other tools can’t operate safely.
-
No Extra Materials, No Extra LaborThe pipe stays intact — no extra couplings, no patchwork, no unnecessary demo. Protects your time and your margin on every call.
-
Anodized Aluminum ConstructionBuilt for the trade — corrosion-resistant, lightweight, and tough enough for daily use on any job site.
| Flange Size | 3" & 4" |
| Drive / Shank | 7/16″ Hex |
| Compatible Pipe | Schedule 40 PVC & ABS |
| Not Compatible With | Schedule 80 PVC |
| Drive Type | Standard power drill (corded or cordless) |
| Material | Anodized Aluminum |
| Includes | Tool + Carrying Case |
| Origin | Made in USA |
| Warranty | Lifetime |
Watch How It Works
See exactly how the Toilet Bowl Flange Remover removes a cast-in flange from Schedule 40 or ABS pipe — drill-powered, no chiseling, no cracked pipe, no extra labor.
Toilet Bowl Flange Remover — FAQ
Everything you need to know before you buy.
What size do I need — 3" or 4"? +
Match the tool to the flange size. Most residential toilet flanges are 4" — that's the opening diameter of the flange that sits inside the drain pipe. The 3" version fits older or smaller installations. If you're unsure, measure the inside diameter of the existing flange before ordering.
What type of pipe is it compatible with? +
The Toilet Bowl Flange Remover is designed for Schedule 40 PVC and ABS pipe. It is not compatible with Schedule 80 pipe due to its thicker wall construction. If you're working on a commercial installation with Schedule 80, this tool is not the right fit.
What drill do I need? +
Any standard cordless or corded drill will work. The tool has a 7/16" hex shank that fits any standard drill chuck. No special drill or adapter needed.
Will it damage the pipe? +
No — that's the whole point. The Flange Remover is engineered to remove the cast-in flange without cutting, cracking, or damaging the surrounding pipe. The pipe stays intact and is ready for a new flange installation immediately after.
Does it work on cast iron flanges? +
The tool is designed for plastic flanges cast into PVC or ABS pipe. It is not intended for cast iron flange removal, which requires different tooling.
Is there a warranty? +
Yes. All Pinell Tools products come with a lifetime warranty against defects in materials and workmanship. If something goes wrong, contact us directly and we'll make it right.
Still have questions? Our team is based in Houma, Louisiana and knows these tools inside and out.
Contact Us →Complete Your Toolkit
Pinell Tools makes the two most common plumbing removal jobs faster and cleaner. Pick up both and you're ready for any drain rough-in.
